Cavallo's multiplier was an early electrostatic influence machine, invented in 1795 by the Anglo-Italian natural philosopher Tiberius Cavallo. Its purpose was to multiply, or amplify, a small electric charge to a level where it was detectable by the insensitive electroscopes of the day. Repeated operation of the device could produce voltages high enough to generate sparks.
Cavallo described his machine in his 1795 Treatise on Electricity. He had examined Bennet's charge doubler of 1787 and found it wanting in several regards, notably in its inconsistent operation and tendency to retain the charge from an earlier experiment. Cavallo resolved to build a better device. His machine consisted of four metal plates supported on a wooden board by posts, of which three were insulating and one conducting.
The charge to be multiplied was applied to the first of these (plate A), which stood on an insulating post. A moveable insulated metal plate (B) was brought close to A (though not permitted to touch it), and then grounded. The charge on A caused charge separation on B due to electrostatic induction. Plate B was then moved away, breaking its earth connection. Since B was insulated, it acquired and retained a small charge opposite in sign to the charge on A. Plate B was transferred by means of an insulating rod to be brought into electrical contact with the third metal plate C which was insulated. Since both B and C were conducting, B would transfer a portion of its charge to C. To maximise the transferred charge, C was placed in close proximity to a final metal plate D, which was earthed.
The experimenter would move Plate B repeatedly back and forth, placing it near to A and earthed at one end of its motion, and then into contact with C at the other. With each cycle, charge was drawn from the Earth and added to C. After a suitable number of cycles, the grounded plate D would be removed, and the electrostatic potential on C would rise to approximately the potential of A multiplied by the number of operations.