*** Welcome to piglix ***

Canon EOS 10D

Canon EOS 10D
Canon EOS 10D
Overview
Type Single-lens reflex
Lens
Lens Interchangeable (EF)
Sensor/Medium
Sensor 22.7 mm x 15.1 mm CMOS
Maximum resolution 3,072 × 2,048 (6.3 megapixels)
ASA/ISO range 100–1600, 3200 in extended mode
Storage CompactFlash(CF) (Type I or Type II), Microdrive compatible / max 8GB
Focusing
Focus modes One-shot, AI Servo, AI Focus, Manual
Focus areas 7 autofocus points, 1 center cross type
Focus bracketing none
Exposure/Metering
Exposure modes Full auto, programmed, shutter-priority, aperture priority, Full manual
Exposure metering TTL full aperture, evaluative, partial, center-weighted
Metering modes Evaluative 35 zone, Partial, C/Wgt Average
Flash
Flash Auto pop-up E-TTL auto flash
Flash bracketing none
Shutter
Shutter Focal-plane shutter, all speeds electronically controlled
Shutter speed range 1/4,000 to 30 s, in 1/2 and 1/3 EV steps, bulb
Continuous shooting 3.0 frame/s., up to 9 frames
Viewfinder
Viewfinder Optical with 95% coverage
Image Processing
Custom WB 7 presets, Auto and custom, 2800-10000 kelvins in 100 K steps
WB bracketing +/-3 levels
General
Rear LCD monitor 1.8 in (46 mm), 118,000 pixels
Battery Li-Ion BP-511/512 rechargeable battery
Optional battery packs BP-511A, BG-ED3
Dimensions 149.7 x 107.5 x 75.0 mm
Weight 790 g (body only)
Made in Japan

The Canon EOS 10D is a discontinued 6.3-megapixel semi-professional digital SLR camera, initially announced on 27 February 2003. It replaced the EOS D60, which is also a 6.3-megapixel digital SLR camera. It was succeeded by the EOS 20D in August 2004.

Despite having an APS-C sensor, the 10D was introduced before EF-S lenses became available and was incompatible with them. The 10D was only able to mount EF lenses. All successive Canon Digital SLR cameras with APS-C sensors can mount EF-S lenses.

The 10D captured RAW images in the Canon CRW file format, which is no longer used by Canon, although modern versions of Canon's Digital Photo Professional will read it.

The 10D had the same 6.3-megapixel resolution as the D60, with an expanded ISO range. It also retained compatibility with the BG-ED3 battery grip, which had been introduced with the Canon EOS D30 and continued with the D60. There were however numerous changes:

The current firmware update is 2.01 (as of 2011-03-17). It is necessary to update to the firmware to enable PICTBRIDGE support on the Canon EOS 10D. PICTBRIDGE allows the printing of images from a camera directly to a printer, without using a personal computer as an intermediary device.


...
Wikipedia

...