Building performance

The building performance of a building or built environment is the efficiency of functioning of buildings and the construction industry, its impact on natural environment, urban environment and its users. It is achieved through means such as architectural design values, building science, architectural engineering, efficient energy use and sustainability.

Although many buildings in the U.S., Canada, U.K., and elsewhere claim to be “green,” “low energy,” or “high performance,” it is rarely clear on what evidence or data these claims are based. Such claims cannot be credible without standardized performance measurement protocols that are applied consistently. If claims of superior building performance are to be believed, it is essential that a common set of measurements be used and the results reported against meaningful benchmarks. Such protocols are also needed to give usable feedback to building designers and operators when measured performance does not match design intent. This article describes ASHRAE’s Performance Measurement Protocols for Commercial Buildings (PMP), which provides a standardized, consistent set of protocols, for a range of cost/accuracy, to facilitate the appropriate comparison of measured energy, water, and indoor environmental quality (thermal comfort, indoor air quality [IAQ], lighting, and acoustics) performance of commercial buildings, while maintaining acceptable levels of building service for the occupants. Benchmarks are included in the protocols to facilitate comparison to peer buildings or for self-reference over time (often before and after retrofit). A recent article describing just the acoustic performance measurement protocols in the PMP has been published in the ASHRAE Journal. The PMP is a collaborative effort of ASHRAE, the U.S. Green Building Council (USGBC), and the Chartered Institution of Building Service Engineers (CIBSE). It began with a detailed evaluation of literature related to measured building performance that included databases, measurement techniques, M&V protocols, and available instrumentation. A project committee representing several ASHRAE Technical Committees (TCs 7.6, 7.9, 4.7, and others) developed the content.

...
Wikipedia