The European buff coat (the term deriving from the ox or buffalo hide from which it was commonly made and its yellowish colour) was an item of leather clothing worn by cavalry and officers during the 17th century, it also saw limited use by some infantry. It was often worn under armour. It was derived from the simple leather jerkins worn by huntsmen and soldiers during the Tudor period, these in turn deriving from the arming doublet worn under full plate armour.
Buff coats were made in sleeveless and sleeved variants and were garments typically crafted from cowhide or buffalo hide. The very finest buff coats were made of elk-hide. Buff leather was produced by a method of "oil tanning"; following treatment with lime the hide was scraped to remove the outer layer which gave the finished product a matt surface. The hide then had cod oil worked into it in a process called "kicking" and was finally air-dried. The oiling and drying steps could be repeated. The finished leather attained its characteristic buff colour and was supple, durable and weather resistant.
Due to the thickness of the leather, the seams of these coats were all butt-jointed, with hidden or partially hidden stitches. Extant examples are lined, either with coarse linen or silk. Many high quality examples show apparent fastenings of gold or silver tape at the front, however, these were merely decorative, the real fastenings being hidden hooks and eyes attached to the inside of the join. The extant collection of buff coats preserved at Littlecote House dating to 1649-1660, contains examples with leather varying from 0.06 to 0.22 inches (1.5 to 5.5 millimeters) in thickness and entire coats weighing between 4lb 4oz and 7lb 8oz (1.9 to 3.4 kilograms).
All buff coats had deep skirts attached, which protected the upper legs of the wearer. Most surviving examples have sleeves, but a minority are sleeveless. Sleeves could be of a single thickness of leather from shoulder to wrist, or alternatively of a double thickness from the shoulder to the elbow, with a single thickness, to allow freedom of movement, to the wrist. Some of the highest quality buff coats, typically shown in portraits of officers, had multiple stripes of gold or silver lace running lengthwise down, or hooped around, the sleeves.