Bent pyramid
| Bent Pyramid | |
|---|---|
 |
|
 |
|
| Sneferu | |
| Coordinates | 29°47′25″N 31°12′33″E / 29.79028°N 31.20917°ECoordinates: 29°47′25″N 31°12′33″E / 29.79028°N 31.20917°E |
| Ancient name | The Southern Shining Pyramid |
| Constructed | c. 2600 BC (4th dynasty) |
| Type | Bent Pyramid |
| Material | Limestone |
| Height | 105 metres (344 ft) |
| Base | 190 metres (623 ft) |
| Volume | 1,426,767 cubic metres (50,385,801 cu ft) |
| Slope | 43°22', top 54°27'44, bottom |
The Bent Pyramid is an ancient Egyptian pyramid located at the royal necropolis of Dahshur, approximately 40 kilometres south of Cairo, built under the Old Kingdom Pharaoh Sneferu (c. 2600 BC). A unique example of early pyramid development in Egypt, this was the second pyramid built by Sneferu.
The Bent Pyramid rises from the desert at a 54-degree inclination, but the top section is built at the shallower angle of 43 degrees, lending the pyramid its very obvious 'bent' appearance.
Archaeologists now believe that the Bent Pyramid represents a transitional form between step-sided and smooth-sided pyramids (see Step pyramid). It has been suggested that due to the steepness of the original angle of inclination the structure may have begun to show signs of instability during construction, forcing the builders to adopt a shallower angle to avert the structure's collapse. This theory appears to be borne out by the fact that the adjacent Red Pyramid, built immediately afterwards by the same Pharaoh, was constructed at an angle of 43 degrees from its base. This fact also contradicts the theory that at the initial angle the construction would take too long because Sneferu's death was nearing, so the builders changed the angle to complete the construction in time. In 1974 Kurt Mendelssohn suggested the change of the angle to have been made as a security precaution in reaction to a catastrophic collapse of the Meidum Pyramid while it was still under construction.
It is also unique amongst the approximately ninety pyramids to be found in Egypt, in that its original polished limestone outer casing remains largely intact. British structural engineer Peter James attributes this to larger clearances between the parts of the casing than used in later pyramids; these imperfections would work as expansion joints and prevent the successive destruction of the outer casing by thermal expansion.
...
Wikipedia