*** Welcome to piglix ***

Balderhead Reservoir

Balderhead Reservoir
BalderheadReservoir(HughMortimer)Aug2006.jpg
Location County Durham, England
Coordinates 54°33′40″N 2°7′25″W / 54.56111°N 2.12361°W / 54.56111; -2.12361Coordinates: 54°33′40″N 2°7′25″W / 54.56111°N 2.12361°W / 54.56111; -2.12361
Type reservoir
Primary inflows moorland streams
Primary outflows Blackton Reservoir
Managing agency Northumbrian Water
Built 1961
First flooded 1965
Max. length 2.85 km (1.77 mi)
Max. width 0.9 km (0.56 mi)
Surface elevation 330 m (1,080 ft)
References

Balderhead Reservoir is a reservoir in Baldersdale, County Durham, England. It is one of a chain of three reservoirs on the River Balder, a tributary of the River Tees, which it joins at Cotherstone, about 5 miles to the east.

Balderhead Reservoir was constructed upstream of two existing reservoirs, Blackton and Hury, and added 3,500 million imperial gallons (16,000,000 m3) to the storage capacity on the River Balder.

Construction of the Balderhead dam began in 1961 and was finished in 1964, with the reservoir being filled during 1965. The dam, which was built of compacted boulder clay and shale, is 157 feet high and 3,000 feet long, and became, at completion, the highest earth dam constructed in the British Isles.

Balderhead Reservoir was commissioned by the Tees Valley and Cleveland Water Board (TVCWB) to increase water supply to Teesdale. Under the Water Act 1973, ownership of the TVCWB's reservoirs, which included the three Baldersdale reservoirs and two others — Selset and Grassholme — on the River Lune a short distance to the north, was transferred to the Northumbrian Water Authority (NWA). In 1989, NWA was privatised, and the reservoirs are now owned and operated by Northumbrian Water. All five reservoirs supply a water treatment works at Lartington, just south of Cotherstone.



...
Wikipedia

...