BB-1 Dragonfly

Dragonfly
A Bowlus/Nelson BB-1 Dragonfly in storage at the Steven F. Udvar-Hazy Center in Dulles, Virginia.
Role	Motor glider
National origin	United States
Manufacturer	Hawley Bowlus
Designer	Hawley Bowlus
Introduction	1947
Number built	7
Developed from	Bowlus BA-100 Baby Albatross

The Bowlus/Nelson BB-1 Dragonfly is an American, two seat, strut-braced, high-wing motor glider that was developed from the Bowlus BA-100 Baby Albatross glider by Hawley Bowlus.

The development of the Dragonfly was sponsored by the Nelson Engine Company to promote the use of their H-44 25 hp (19 kW) four cylinder two-stroke engine. The engine was mounted in the rear of the fuselage pod, in pusher configuration, with the wooden two bladed 42 in (107 cm) propeller below the metal tail boom. The fuel tank holds 3 U.S. gallons (11 L; 2.5 imp gal), enough for self-launching, but not for cross-country powered flight.

The Dragonfly shares the Baby Albatross's molded plywood fuselage pod, aluminium tube tail boom and strut-braced double spar wooden wing, covered in aircraft fabric aft of the spar. The leading edge is a plywood D-cell. The aircraft features dual controls and a retractable tricycle landing gear with a steerable nose wheel. The engine is started by a ratchet-wire recoil start system that allows restarts in flight, as well as on the ground.

Federal Aviation Administration certification of the type was achieved on 21 April 1947, with Nelson Aircraft Corporation as the certificate holder and the type officially known as Nelson Auxiliary Power Glider BB-1. The type certificate indicates that neither the engine nor the propeller need be certified. The type certificate specifies that the Nelson H-49 engine of 28 hp (21 kW) may also be installed.

...
Wikipedia