Aythorpe Roding Windmill

Aythorpe Roding Mill
The restored mill in February 2005
Origin
Mill name	Aythorpe Roding Mill
Mill location	TL 590 152
Coordinates	51°48′43″N 0°18′25″E / 51.812°N 0.307°E / 51.812; 0.307Coordinates: 51°48′43″N 0°18′25″E / 51.812°N 0.307°E / 51.812; 0.307
Operator(s)	Privately Owned
Year built	ca. 1779
Information
Purpose	Corn mill
Type	Post mill
Storeys	Three storeys
Roundhouse storeys	Single storey roundhouse
No. of sails	Four sails
Type of sails	Patent sails
Windshaft	Cast iron
Winding	Fantail
Fantail blades	Six blades
No. of pairs of millstones	Two pairs

Aythorpe Roding Windmill is a Grade II* listedPost mill at Aythorpe Roding, Essex, England which has been restored to working order.

Aythorpe Roding Windmill stands on the site of an earlier mill which was standing in 1615. It was probably built in 1779 as witnessed by the inscription Built 1779 on a timber in the mill. The mill was insured in 1798 for £50 and in 1805 for £140. The mill was drawn on the 1846 Tithe Map as having an open trestle. It was advertised in the Chelmsford Chronicle of 10 February 1860 as "for sale to be pulled down and removed by the purchaser". At some point, probably between 1860 and 1868, the mill was modernised. The common sails were replaced by patents; the wooden windshaft replaced by a cast-iron one; the layout of the millstones changed from head and tail to breast; a roundhouse was added to protect the trestle and provide storage space; a fantail was added to turn the mill to wind automatically, replacing the manual tailpole previously carried. The mill had been fitted with a fantail by 1868, and a steam engine by 1890, driving an extra pair of millstones in the roundhouse. It was working until 1937. The mill was leased by Essex County Council in 1940 Restoration by millwright Vincent Pargeter was completed in 1982. The mill ground its first grain after restoration on 3 March 1982. It was officially opened to the public by Ken Farries on 30 April 1983.

Aythorpe Roding Windmill is a post mill with a single-storey roundhouse. It has four double patent sails carried on a cast-iron windshaft. Two pairs of millstones are located in the breast. The mill is winded by fantail. The mill is 44 feet 3 inches (13.49 m) high to the roof.

The crosstrees are 24 feet (7.32 m) long. The upper crosstree is 10 inches (254 mm) square in section and the lower crosstree is 13 inches (330 mm) by 12 inches (305 mm). The upper crosstree is made of two pieces of timber, scarf jointed in the vertical plane, and with an iron plate bolted under the join. There is also an oak plate on one side of the crosstree, which is bolted to the crosstree, a pair of spacers being used as the scarf is within the horns of the main post. The lower crosstree bears a date of 1869, which is probably the date the roundhouse was erected. The main post is 20 feet 3 inches (6.17 m) in length, and 30 inches (762 mm) by 29 inches (737 mm) in section at its base. It is fitted with a cast-iron Samson head by Christie and Norris, the Chelmsford millwrights.