Amateur radio bands

Amateur radio frequency allocation is done by national telecommunications authorities. Globally, the International Telecommunication Union (ITU) oversees how much radio spectrum is set aside for amateur radio transmissions. Individual amateur stations are free to use any frequency within authorized frequency ranges; authorized bands may vary by the class of the station license.

Radio amateurs use a variety of transmission modes, including Morse code, radioteletype, data, and voice. Specific frequency allocations vary from country to country and between ITU regions as specified in the current ITU HF frequency allocations for amateur radio. The list of frequency ranges is called a band allocation, which may be set by international agreements, and national regulations. The modes and types of allocations within each frequency band is called a bandplan; it may be determined by regulation, but most typically is set by agreements between amateur radio operators.

National authorities regulate amateur usage of radio bands. Some bands may not be available or may have restrictions on usage in certain countries or regions. International agreements assign amateur radio bands which differ by region.

Frequencies above 30 MHz are referred to as Very High Frequency (VHF) region and those above 300 MHz are called Ultra High Frequency (UHF). The allocated bands for amateurs are many megahertz wide, allowing for high-fidelity audio transmission modes (FM) and very fast data transmission modes that are unfeasible for the kilohertz-wide allocations in the HF bands.

While "line of sight" propagation is a primary factor for range calculation, much of the interest in the bands above HF comes from use of other propagation modes. A signal transmitted on VHF from a hand-held portable will typically travel about 5–10 km depending on terrain. With a low power home station and a simple antenna, range would be around 50 km.

...
Wikipedia