*** Welcome to piglix ***

Aero Spacelines Mini Guppy

Mini Guppy
Aero Spacelines Mini Guppy.JPG
Mini Guppy at the Tillamook Air Museum in Tillamook, Oregon.
Role Outsized cargo aircraft
National origin United States
Manufacturer Aero Spacelines, Inc.
First flight May 24, 1967
Retired 1995
Status Retired
Primary users Aero Spacelines
Aero Union
Erickson Air Crane
Number built 1 MG, 1 MGT
Developed from Boeing C-97 Stratofreighter

The Aero Spacelines Mini Guppy is a large, wide-bodied US cargo aircraft used for aerial transport of outsized cargo components. The Mini Guppy is one of the Guppy line of aircraft produced by Aero Spacelines.

Two versions of the Mini Guppy were produced. Both versions are colloquially referred to as the "Mini Guppy".

Both Mini Guppies were built using parts salvaged from surplus Boeing 377/C-97Js, but with an all-new fuselage. This enabled Aero Spacelines to widen the Mini Guppy cargo bay floor to 13 ft (4 m), as opposed to the 8 ft (2.4 m) restriction imposed when building directly onto a B-377 fuselage. Borrowed parts included the cockpit, wings, and tail.

The Mini Guppy, or "MG", was built with a swing-tail to facilitate cargo loading. It was powered by the original Pratt & Whitney R-4360 Wasp Major piston engines, enabling it to carry a maximum load of 32,000 pounds (14,500 kg), and cruise at 250 mph (400 km/h). Its cargo bay was 18 ft (5.5 m) in diameter, and a maximum of 91 ft 6 in (27.9 m) long, with a 73 ft 2 in (22.3 m) constant section.

The Mini Guppy first flew on May 24, 1967, and Aero Spacelines operated it for several years, ferrying contract cargo until in 1974 it was sold to American Jet Industries. American Jet Industries sold it to Aero Union in 1980, who sold it to Erickson Air Crane eight years later. Erickson Air Crane used the Mini Guppy to haul heavy equipment until 1995, when it was retired to the Tillamook Air Museum in Tillamook, Oregon, where it resides today.

The second version was officially known as the Mini Guppy Turbine (MGT) and Guppy 101. It was the first Guppy aircraft to feature upgraded Allison 501-D22C turboprop engines. Like the MG, the MGT had a 73 ft 2 in (22.3 m) constant diameter section of the cargo hold, but the overall length had been increased to 103 ft 2 in (31.4 m), and the diameter was slightly wider: 18 ft 4 in (5.6 m). This, combined with the upgraded engines, enabled it to carry a maximum payload of 62,925 pounds (28,540 kg) -- almost twice the load the MG could handle. It was built with a swing-nose for easier cargo loading.


...
Wikipedia

...