Accelerator Coaster
| Accelerator Coaster | |
|---|---|
|
|
| Status | In Production |
| First manufactured | 2002 |
| No. of installations | 15 |
| Manufacturer | Intamin |
| Restraint Style | Over-the-shoulder, Lap-bar |
An Accelerator Coaster is a hydraulically-launched roller coaster model from Intamin. The model usually consists of a long, straight launch track, a top hat tower element, and magnetic brakes that smoothly stop the train without making contact. The technology was developed by Intamin engineers as an alternative to electromagnetic launch systems, such as the Linear Induction Motor (LIM) and Linear Synchronous Motor (LSM), that are found on earlier launched roller coasters like the Flight of Fear and The Joker's Jinx. Unlike the earlier linear induction motors, the Accelerator Coaster's launch system exhibits constant acceleration and is capable of reaching greater speeds.
Accelerator Coasters with the top hat element are known to perform an occasional rollback – when the train is unable to complete the top hat element and rolls back to the starting point – which can occur due to a number of different factors. Despite this, Accelerator Coasters have a great track record for safety and are extremely power efficient, especially compared to older technologies such as the classic chain lift found on most roller coasters. Formula Rossa, the world's fastest Accelerator Coaster, and Kingda Ka, the world's tallest, are some of the most well-known installations around the world.
An Accelerator Coaster's launch system operates on the same basic principle as a Super Soaker, but on a much larger scale. The coaster's power source is several hydraulic pumps, each capable of producing 500 horsepower (370 kW). These pumps push hydraulic fluid into several accumulators. These accumulators are divided into two compartments by a movable piston, one side filled with hydraulic fluid and the other with nitrogen gas. The nitrogen is held in large tanks directly beneath the actual accumulator. As the hydraulic fluid fills the accumulators, it pushes on the pistons, compressing the nitrogen. It takes approximately 45 seconds to pressurize the accumulators with all pumps operating. All of this pressure is released during each launch, which typically lasts between 2 and 4 seconds.
...
Wikipedia