*** Welcome to piglix ***

Acceleration onset cueing


Acceleration onset cueing is a term for the cueing principle used by a simulator motion platform.

Motion platforms used in "Level D" Full flight simulators (FFS) and equivalent military simulators have six jacks that can move the replica cockpit that is mounted on the platform in any of the six degrees of freedom (6-DoF) that can be experienced by any body free to move in space. These are the three rotations Pitch, Roll and Yaw, and three linear movements Heave (up and down), Sway (side to side) and Surge (fore and aft). The jack layout used is generally that of the so-called Stewart platform, shown in a moving picture on the left and on which the simulator cabin will be mounted.

Acceleration onset cueing works in three phases:

The various human body motion-sensors react to accelerations rather than steady-state motions and have thresholds below which they do not transmit signals to the brain (the latter explains why instruments are needed for safe cloud flying). Furthermore, impulses from the set of body motion sensors are processed by the brain in a timescale of milliseconds compared to longer time intervals for visual cues of the Outside World (OTW) to be registered by the brain. The body motion-sensors include the inner-ear sensors, (semicircular canals and otoliths, the "Vestibular sensors"), the muscle-and joint sensors, and sensors that register movements and pressures on body parts such as arms, legs and buttocks.

In the real world the brain is (subconsciously) expecting to receive the above motion cues before later registering the associated change in the visual scene. In a simulator, if motion cues are not present to back up visual cues, disorientation can result ("simulator sickness") due to the cue-mismatch compared to the real world.

The above way the body signals motion to the brain coincides very well with acceleration-onset cueing in a simulator. This is the reason why well-designed and properly set-up modern low-latency motion platforms in simulators work well for all aircraft from large transports to the low-G envelope of fighter aircraft.

Because fighter aircraft are capable of high-G, which cannot be modelled by a 6-jack motion platform, the majority of fighter simulators are not equipped with motion platforms.(source: http://arc.aiaa.org/doi/abs/10.2514/6.1989-3272)

In contrast, civil airliner Full Flight Simulators to the international Level D/Type 7 standard must have a 6-axis platform, and many military simulators for large aircraft and helicopters follow the civil Level D/Type 7 design.


...
Wikipedia

...