*** Welcome to piglix ***

6.5mm Remington

6.5mm Remington Magnum
Type Rifle
Place of origin  USA
Production history
Designer Remington
Designed 1966
Manufacturer Remington
Produced 1966
Specifications
Parent case .350 Remington Magnum
Case type Belted bottleneck
Bullet diameter .264 in (6.7 mm)
Neck diameter .298 in (7.6 mm)
Shoulder diameter .495 in (12.6 mm)
Base diameter .532 in (13.51 mm)
Rim diameter .532 in (13.5 mm)
Rim thickness .050 in (1.3 mm)
Case length 2.170 in (55.1 mm)
Overall length 2.800 in (71.1 mm)
Case capacity 68 gr H2O (4.4 cm3)
Primer type Large rifle
Maximum pressure 63,100 psi (435 MPa)
Maximum CUP 53000 CUP
Ballistic performance
Bullet mass/type Velocity Energy
120 gr (8 g) PSPCL 3,210 ft/s (980 m/s) 2,745 ft·lbf (3,722 J)

The 6.5mm Remington Magnum is a .264 caliber (6.7 mm) belted bottlenecked cartridge introduced in 1966. The cartridge is based on a necked down .350 Remington Magnum which on turn is based on a shortened, necked down, blown out .375 H&H Magnum case. The cartridge was one of the first short magnum cartridges.

The 6.5 mm (.264 caliber) has been extremely popular in Europe and especially in the Scandinavian countries and this trend continues today. The 6.5×55mm Swedish Mauser, 6.5×58mmR Krag–Jørgensen and the 6.5×58mm Portuguese are among the more famous of these cartridges of European origin. What the 6.5 mm (.264 caliber) bullets offered was excellent sectional density and ballistic coefficients. The Scandinavian countries dominated the Olympics in the Nordic events shooting 6.5 mm center fire cartridges like the 6.5×55mm until 1972 when the centerfire shooting events were dropped. However, in North America the .264 caliber did not make much of a head way in terms of popularity. Beginning in the 1950s several ex-service Norwegian Krag–Jørgensen and Swedish Mauser began trickling into the United States. Winchester had designed the .264 Winchester Magnum but it did not gain much of a following and the rifles were plagued by short barrel lives.

In 1966 Remington introduced the 6.5 Remington Magnum, which was based upon the previous years' .350 Remington Magnum, in the 18.5 inch barrel Model 600 carbine. This was poor choice of rifle by Remington as it was unable to exploit the performance potential of the 6.5mm Remington. While Remington did later chamber the cartridge in the 24 inch Model 700 rifle the damage was already done to the cartridge's reputation from which it would not recover and eventually passed into obsolesce. Attempts have been made to revive the cartridge by Ruger and then again by Remington in 2004 in the Model 673 Guide Rifle but these attempts at revival have been unsuccessful.

The 6.5mm Remington Magnum remains an excellent rifle cartridge with a greater performance potential over all the European 6.5mm cartridges save the 6.5x68mm RWS which is similar to the .264 Winchester Magnum. Furthermore, due to its short stature, it can be chambered in lighter, quicker handling short action rifles. On account of the case capacity of the cartridge a barrel with a minimum length of 24 inches is necessary to realize the potential of the cartridge. With shorter barrels performance level drop dramatically especially when slower burning powders are utilized.


...
Wikipedia

...