Aluminium smelting

Aluminium smelting is the process of extracting aluminium from its oxide, alumina, generally by the Hall-Héroult process. Alumina is extracted from the ore bauxite by means of the Bayer process at an alumina refinery. Aluminium smelting is the 2nd most important metallurgical industry in India.

This is an electrolytic process, so an aluminium smelter uses prodigious amounts of electricity; they tend to be located very close to large power stations, often hydro-electric ones, and near ports since almost all of them use imported alumina. A large amount of carbon is also used in this process, resulting in significant amounts of greenhouse gas emissions.

The Hall-Héroult electrolysis process is the major production route for primary aluminium. An electrolysis cell is made of a steel shell with a series of insulating linings of refractory materials. The cell consists of a brick-lined outer steel shell as a container and support. Inside the shell, cathode blocks are cemented together by ramming paste. The top lining is in contact with the molten metal and acts as the cathode. The molten electrolyte is maintained at high temperature inside the cell. The prebaked anode is also made of carbon in the form of large sintered blocks suspended in the electrolyte. A single Soderberg electrode or a number of prebaked carbon blocks are used as anode, while the principal formulation and the fundamental reactions occurring on their surface are the same.

An aluminium smelter consists of a large number of cell (pots) in which the electrolysis takes place. A typical smelter contains anywhere from 300 to 720 pots, each of which produces about a ton of aluminium a day, though the largest proposed smelters are up to five times that capacity. Smelting is run as a batch process, with the aluminium metal deposited at the bottom of the pots and periodically siphoned off. Particularly in Australia these smelters are used to control electrical network demand, and as a result power is supplied to the smelter at a very low price. However power must not be interrupted for more than 4-5 hours, since the pots have to be repaired at significant cost if the liquid metal solidifies.

Alumina is dissolved in molten cryolite, typically at 960 °C, according to the following simplified reactions:

...
Wikipedia