*** Welcome to piglix ***

Relay races


During a relay race, members of a team take turns running, orienteering, swimming, cross-country skiing, biathlon, or ice skating (usually with a baton in the fist) parts of a circuit or performing a certain action. Relay races take the form of professional races and amateur games. In the Olympic games, there are several types of relay races that are part of track and field.

A swimming relay of four swimmers usually follows this strategy: second-fastest, third-fastest, slowest, then fastest (anchor). However, it is not uncommon to see either the slowest swimmer racing in the second slot (creating an order of second-fastest, slowest, third-fastest, and then fastest), or an order from slowest to fastest (an order of slowest, third-fastest, second-fastest, fastest).

FINA rules require that a foot of the second, third or fourth swimmer must be contacting the platform while (and before) the incoming teammate is touching the wall; the starting swimmer may already be in motion, however, which saves 0.6–1.0 seconds compared to a regular start. Besides, many swimmers perform better in a relay than in an individual race owing to a team spirit atmosphere. As a result, relay times are typically 2–3 seconds faster than the sum of best times of individual swimmers.

The three standard relays raced at the Olympics are the 4 × 100 m freestyle relay, 4 × 200 m freestyle relay and 4 × 100 m medley relay.

In athletics, the two standard relays are the 4 × 100 metres relay and the 4 × 400 metres relay. Traditionally, the 4 × 400 m relay finals are the last event of a track meet, and is often met with a very enthusiastic crowd, especially if the last leg is a close race. It is hard to measure exact splits in a 4 × 400 (or a 4 × 100) relay. For example, if a team ran a 3-minute 4 × 400, it does not mean every runner on the team has to run a 45-second open 400, because a person starts accelerating before he/she has the baton, therefore allowing for slightly slower overall open 400 times. A 4 × 400 relay generally starts in lanes for the first leg, including the handoff. The second leg then proceeds to run in lanes for the first 100 metres, after which point the runners are allowed to break into the first lane on the backstretch, as long as they do not interfere with other runners. A race organizer then puts the third leg runners into a line depending on the order in which they are running (with the first place closest to the inside). The faster teams pass first, while the slower teams have to slide in to the inside lanes as they come available.


...
Wikipedia

...