*** Welcome to piglix ***

Offshore wind power


Offshore wind power or offshore wind energy is the use of wind farms constructed offshore, usually on the continental shelf, to harvest wind energy to generate electricity. Higher wind speeds are available offshore compared to on land, so offshore wind power’s contribution in terms of electricity supplied is higher, and NIMBY opposition to construction is usually much weaker. The cost of offshore wind power has historically been higher than that of onshore wind generation, but in 2016 had decreased to €54.5/MWh the 700 MW Borssele 3&4 due to government tender and size. Similarly, €49.90/MWh ($55.34, without transmission) was achieved at the 600 MW Kriegers Flak.

As of 2013 the 630 megawatt (MW) London Array is the largest offshore wind farm in the world, with the 504 (MW) Greater Gabbard wind farm the second largest, followed by the 367 MW Walney Wind Farm. All are off the coast of the UK. These projects will be dwarfed by subsequent wind farms that are in the pipeline, including Dogger Bank at 4,800 MW, Norfolk Bank (7,200 MW), and Irish Sea (4,200 MW). At the end of June 2013 total European combined offshore wind energy capacity was 6,040 MW. UK installed 513.5 MW offshore windpower in the first half year of 2013.

Offshore wind power refers to the construction of wind farms in bodies of water to generate electricity from wind. Unlike the typical usage of the term "offshore" in the marine industry, offshore wind power includes inshore water areas such as lakes, fjords and sheltered coastal areas, utilizing traditional fixed-bottom wind turbine technologies, as well as deeper-water areas utilizing floating wind turbines.

The U.S. National Renewable Energy Laboratory has further defined offshore wind power based on its siting in terms water depth to include shallow water, transitional water, and deep water offshore wind power.


...
Wikipedia

...