*** Welcome to piglix ***

Kyanite

Kyanite
Kyanite crystals.jpg
General
Category Nesosilicate
Formula
(repeating unit)
Al2SiO5
Strunz classification 9.AF.15
Crystal system Triclinic
Crystal class Pinacoidal (1)
(same H-M symbol)
Space group P1
Unit cell a = 7.1262(12) Å
b = 7.852(10) Å
c = 5.5724(10) Å
α = 89.99(2)°, β = 101.11(2)°
γ = 106.03(1)°; Z = 4
Identification
Color Blue, white, rarely green, gray, yellow, pink, orange, and black, can be zoned
Crystal habit Columnar; fibrous; bladed
Twinning Lamellar on {100}
Cleavage [100] perfect [010] imperfect with 79° angle between
Fracture Splintery
Tenacity Brittle
Mohs scale hardness 4.5-5 parallel to one axis
6.5-7 perpendicular to that axis
Luster Vitreous to pearly
Streak White
Diaphaneity Transparent to translucent
Specific gravity 3.53 - 3.65 measured; 3.67 calculated
Optical properties Biaxial (-)
Refractive index nα = 1.712 - 1.718 nβ = 1.720 - 1.725 nγ = 1.727 - 1.734
Pleochroism Trichroic, colorless to pale blue to blue
2V angle 78°-83°
References

Kyanite, whose name derives from the Greek word kuanos sometimes referred to as "kyanos", meaning deep blue, is a typically blue silicate mineral, commonly found in aluminium-rich metamorphic pegmatites and/or sedimentary rock. Kyanite in metamorphic rocks generally indicates pressures higher than four kilobars. Although potentially stable at lower pressure and low temperature, the activity of water is usually high enough under such conditions that it is replaced by hydrous aluminosilicates such as muscovite, pyrophyllite, or kaolinite. Kyanite is also known as disthene, rhaeticite and cyanite.

Kyanite is a member of the aluminosilicate series, which also includes the polymorph andalusite and the polymorph sillimanite. Kyanite is strongly anisotropic, in that its hardness varies depending on its crystallographic direction. In kyanite, this anisotropism can be considered an identifying characteristic.

At temperatures above 1100 °C kyanite decomposes into mullite and vitreous silica via the following reaction: 3(Al2O3·SiO2) → 3Al2O3·2SiO2 + SiO2. This transformation results in an expansion.

Kyanite is used primarily in refractory and ceramic products, including porcelain plumbing fixtures and dishware. It is also used in electronics, electrical insulators and abrasives.


...
Wikipedia

...