*** Welcome to piglix ***

Incan engineers


The builders of Machu Picchu planned and built impressive waterworks in their city centers, including canals, fountains, drainage systems and expansive irrigation. Machu Picchu’s infrastructure and water supply system have been hailed as “the pinnacle of the architectural and engineering works of the Inca civilization”. Major Incan centers were chosen by experts who decided the site, its apportionment, and the basic layout of the city.

In 1450 the best example of Incan civil engineering, Machu Picchu, was constructed. The famous lost Inca city is an architectural remnant of a society whose understanding of civil and hydraulic engineering was both advanced and complete. At 8,000 feet (2,400 m) in the Andes Mountains, the city planners had to consider the steep slopes of the site as well as the 2,000 mm of rainfall per year. Making models out of clay before beginning to build, the city planners remained consistent with Inca architecture and laid out a city that separated the agriculture and urban areas. Before construction began the engineers had to assess the spring and whether it could provide for all of the city’s anticipated citizens. After evaluating the water supply, the civil engineers designed a 2,457-foot (749 m)-long canal to what would become the city’s center. The canal descends the mountain slope, enters the city walls, passes through the agricultural sector, then crosses the inner wall into the urban sector, where it feeds a series of fountains. The fountains are publicly accessible and partially enclosed by walls that are typically about 1.2 m high, except for the lowest fountain, which is a private fountain for the Temple of the Condor and has higher walls. At the head of each fountain, a cut stone conduit carries the water to a rectangular spout, which is shaped to create a jet of water suitable for filling aryballo–a typical Inca clay water jug. The water collects in a stone basin in the floor of the fountain, then enters a circular drain that delivers it to the approach channel for the next fountain.


The Incans built the canals on steady grades, using cut stones as the water channels. Most citizens worked on the construction and maintenance of the canal and irrigation systems, bronze and stone tools to complete the water-tight stone canals. The water then traveled through the channels into sixteen fountains known as the "stairway of fountains", reserving the first water source for the emperor. This incredible feat supplied the population of Machu Picchu, which varied between 300 and 1000 people when the emperor was present, and also helped irrigate water to the farming steppes. The fountains and canal system were built so well that they would, after a few minor repairs, still work today.


...
Wikipedia

...