*** Welcome to piglix ***

Imbrex and tegula


The imbrex and tegula (plurals imbrices and tegulae) were overlapping roof tiles used in ancient Greek and Roman architecture as a waterproof and durable roof covering. They were made predominantly of fired clay, but also sometimes of marble, bronze or gilt. In Rome, they replaced wooden shingles, and were used on almost every type of structure, from humble outbuildings to grand temples and public facilities.

The tegula (Greek solenes) was a plain flat tile, or a flat tile with raised edges, which was laid flat upon the roof, while the imbrex (Greek kalupter) was a semi-cylindrical roofing tile, like a half-pipe, laid over the joints between the tegulae. When well-made and properly imbricated (overlapped), there was little need for further waterproofing or sealant.

The roofing area was generally surrounded by antefixae which were often decorated, and had several decorative anthemia to cover each end row imbrex.

The concept of imbrex and tegula roofing in pitched roof construction is still in use today as an international feature of style and design, and is the origin of the term for the condition of things arranged in overlapping layers.

Imbrices and tegulae were first made by the Greeks. Like bricks, they were formed of wet clay in a four-sided mould, often shaped with a piece of wire, and then baked in an oven or kiln. More sophisticated moulds were developed over time.

Tegulae were originally made perfectly flat, or with nothing more than a ridge underneath the upper border, which allowed the tile to be "hung" upon a sloping roof so that it would not slide to the ground. Later, tegulae were formed with a raised border on the two vertical sides, which would channel rainwater to the bottom of the tile, rather than allowing it to seep between tiles to dampen the roofing materials. Another improvement occurred when these two raised borders were made to converge, forming a broad v-shaped trapezoid with the narrowest edge downwards, nestling into the widest part of the tile below it to form a continuous channel.


...
Wikipedia

...