*** Welcome to piglix ***

Hexane

Hexane
Skeletal formula of hexane
Skeletal formula of hexane with all implicit carbons shown, and all explicit hydrogens added
Ball and stick model of hexane
Spacefill model of hexane
Names
IUPAC name
Hexane
Other names
Sextane
Identifiers
110-54-3 YesY
3D model (Jmol) Interactive image
1730733
ChEBI CHEBI:29021 YesY
ChEMBL ChEMBL15939 YesY
ChemSpider 7767 YesY
DrugBank DB02764 YesY
ECHA InfoCard 100.003.435
EC Number 203-777-6
1985
KEGG C11271 YesY
MeSH n-hexane
PubChem 8058
RTECS number MN9275000
UNII 2DDG612ED8 YesY
UN number 1208
Properties
C6H14
Molar mass 86.18 g·mol−1
Appearance Colorless liquid
Odor Petrolic
Density 0.6548 g mL−1
Melting point −96 to −94 °C; −141 to −137 °F; 177 to 179 K
Boiling point 68.5 to 69.1 °C; 155.2 to 156.3 °F; 341.6 to 342.2 K
9.5 mg L−1
log P 3.764
Vapor pressure 17.60 kPa (at 20.0 °C)
7.6 nmol Pa−1 kg−1
UV-vismax) 200 nm
-74.6·10−6 cm3/mol
1.375
Viscosity 0.3 mPa · s
Thermochemistry
265.2 J K−1 mol−1
296.06 J K−1 mol−1
−199.4–−198.0 kJ mol−1
−4180–−4140 kJ mol−1
Hazards
Safety data sheet See: data page
GHS pictograms The flame pictogram in the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) The exclamation-mark pictogram in the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) The health hazard pictogram in the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) The environment pictogram in the Globally Harmonized System of Classification and Labelling of Chemicals (GHS)
GHS signal word DANGER
H225, H304, H315, H336, H373, H411
P210, P261, P273, P281, P301+310, P331
Highly Flammable F Harmful Xn Dangerous for the Environment (Nature) N
R-phrases R11, R38, R48/20, R51/53, R62, R65, R67
S-phrases (S2), S16, S29, S33, S36/37
NFPA 704
Flammability code 3: Liquids and solids that can be ignited under almost all ambient temperature conditions. Flash point between 23 and 38 °C (73 and 100 °F). E.g., gasoline) Health code 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g., chloroform Reactivity code 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g., liquid nitrogen Special hazards (white): no codeNFPA 704 four-colored diamond
Flash point −26.0 °C (−14.8 °F; 247.2 K)
234.0 °C (453.2 °F; 507.1 K)
Explosive limits 1.2–7.7%
Lethal dose or concentration (LD, LC):
LD50 (median dose)
25 g kg−1(oral, rat)
28710 mg/kg (rat, oral)
56137 mg/kg (rat, oral)
US health exposure limits (NIOSH):
PEL (Permissible)
TWA 500 ppm (1800 mg/m3)
REL (Recommended)
TWA 50 ppm (180 mg/m3)
IDLH (Immediate danger)
1100 ppm
Related compounds
Related alkanes
Supplementary data page
Refractive index (n),
Dielectric constantr), etc.
Thermodynamic
data
Phase behaviour
solid–liquid–gas
UV, IR, NMR, MS
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
YesY  (what is YesYN ?)
Infobox references

Hexane /ˈhɛksn/ is an alkane of six carbon atoms, with the chemical formula C6H14.

The term may refer to any of the five structural isomers with that formula, or to a mixture of them. In IUPAC nomenclature, however, hexane is the unbranched isomer (n-hexane); the other four isomers are named as methylated derivatives of pentane and butane. IUPAC also uses the term as the root of many compounds with a linear six-carbon backbone, such as 2-methylhexane (C7H16), which is also called "isoheptane".

Hexanes are significant constituents of gasoline. They are all colorless liquids at room temperature, odorless when pure, with boiling points between 50 and 70 °C. They are widely used as cheap, relatively safe, largely unreactive, and easily evaporated non-polar solvents.

In industry, hexanes are used in the formulation of glues for shoes, leather products, and roofing. They are also used to extract cooking oils (such as canola oil or soy oil) from seeds, for cleansing and degreasing a variety of items, and in textile manufacturing. They are commonly used in food based soybean oil extraction in the United States, and are potentially present as contaminants in all soy food products in which the technique is used; the lack of regulation by the FDA of this contaminant is a matter of some controversy.


...
Wikipedia

...