*** Welcome to piglix ***

Centre Le Corbusier

Pavillon Le Corbusier (since May 2016)
Centre Le Corbusier – Heidi Weber Museum (by April 2016)
Centre Le Corbusier 2011-06-18 18-10-04.jpg
Established 1967
Location Zürichhorn, Switzerland
Coordinates Coordinates: 47°21′22.86″N 8°33′4.03″E / 47.3563500°N 8.5511194°E / 47.3563500; 8.5511194
Type art and biographical museum dedicated to the work of Le Corbusier
Founder Heidi Weber
Curator Heidi Weber, Bernard Weber and Prof. Dr. Felix Richner

The Pavillon Le Corbusier is a Swiss art museum in Zürich-Seefeld at Zürichhorn dedicated to the work of the Swiss architect Le Corbusier. In 1960 Heidi Weber had the vision to establish a museum designed by Le Corbusier – this building should exhibit his works of art in an ideal environment created by the architect himself in the then Centre Le Corbusier or Heidi Weber Museum. In April 2014 the building and museum went over to the city of Zürich, and was renamed in May 2016.

The building is located on the Zürichsee lake shore nearby Zürichhorn in the Seefeld quarter. It can be reached by foot (20 minutes from BellevueplatzSechseläutenplatz) or by public transportation: Trams 2 and 4 and bus line 33 to stops Höschgasse or Fröhlichstrasse, or bus lines 912 and 916 from Bellevue to Chinagarten, or by the Limmat boats operated by the Zürichsee-Schifffahrtsgesellschaft (ZSG) towards Zürichhorn.

It is the last building designed by Le Corbusier marking a radical change of his achievement of using concrete and stone, framed in steel and glass, in the 1960s created as a signpost for the future. Le Corbusier made intensive use of prefabricated steel elements combined with multi-coloured enamelled plates fitted to the central core, and above the complex he designed a 'free-floating' roof to keep the house protected from the rain and the sun.

The most prominent architectural element, the roof, consists of two square parts, each side having a surface of 12 x 12 metres (39 ft). The total ground surface measures 12 x 26.3 metres (86 ft), consisting of welded metal sheets and having a weight of 40 tons. The roof was prefabricated and thereafter, in the biggest possible units, transported to the building site, where it was assembled on the ground. The two finally welded parts of the roof were then lifted to their final height (9 metres (30 ft)) by a crane and fixed on the pillars. With the frame thus completed, the construction process benefited from the independent roof protection which was at that time already in its proper place. It consists of cubes 2.26 x 2.26 metres (7.4 ft) which were assembled on the site. Walls, windows, ceilings and floors were then screwed onto the steel frame. The walls consist of enamelled panels measuring 1.13 metres (3.7 ft) x 2.26 metres (7.4 ft). The placing of these enamel panels was planned according to a particular rhythmic system. Finally, the entire building complex was placed on a concrete ground floor. The building has two floors – five single-storied and one double-storied rooms. When constructing the building complex, more than 20,000 bolts were used.


...
Wikipedia

...